Load Bearing: >30T(static)
Warranty: 12 Months
Body material: Heavy-duty casting aluminum
Battery: Lithium battery 1000mA
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Bidirectional Solar Road Studs Pavement Marker Features:
•Up to 800 meters of visibility.
•Reliable all night, all-year-round performance.
•Totally sustainable harnessing free solar energy.
•Used where street lighting is either unavailable, solar stud not cost-effective, or environmentally impossible.
•Cost-effective, LED solar road studs are easy to install and require absolutely no wires or maintenance.
•Solar road studs pavement marker self-contained surface mounted.
•Solar road studs pavement marker accept OEM/ODM
Bidirectional Solar Road Studs Pavement Marker Parameters:
| Material: | Aluminium+ PC |
| Power supply: | Solar panel(monocrystalline 2.5V/0.3W) |
| Battery: | Lithium battery 1000mA |
| Working model: | Blinking or Constant Charging at daytime and working automatically at night |
| Life span: | 5 years for lithium battery; |
| LED colors: | Yellow, White, Red, Green, Blue |
| Resistance: | >30T(static) |
| Size: | φ123*45mm (φ4.84″*1.77″) |
| Visual distance: | >800M |
| Water poof: | IP68 |
| Carton Size: | 1pcs/box; 30pcs/ctn; Weight: 30kgs; Carton size: 67.5*28*20cm (1pcs/box; 30pcs/ctn; Weight: 66.14bs; Carton size: 26.57″*11.02″*7.87″) |
Application of LED solar road studs C3:
♥Schools and hospitals
♥Highways
♥High traffic areas
♥Walking paths
♥Transit stations
♥Parks and campuses
♥Urban Road
How to install Solar road Studs Light Pavement Marker C3:
1.Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 125mm and depth will be 45mm.
2.Remove all debris from the installation hole.
3.Pour epoxy into the holes per the manufacturer’s instruction.
4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar road stud shaft.
5.Set the lighting surface of the solar road stud light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar road stud shaft.
After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
Load Bearing: More Than 30 Tons
Warranty: 18 Months
Body material: GB Cast Aluminium alloy
Power supply: USA Brand Flexible High Efficient Solar Panel (2.5V/0.38W)
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: With shank or Without shank
Load Bearing: >20T(static)
Warranty: 12 Months
Body material: GB Cast Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: With shank or Without shank
Body material: PC(Japan Brand)
Warranty: 12 Months
Power supply: USA Brand Flexible High Efficient Solar Panel 5V/0.4W
Visual distance: ＞ 800m
Load Bearing: 20 Tons
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: Without shank
Load Bearing: More Than 40 Tons (can be installed in the middle of the road)
Warranty: 18 Months
Body material: Aluminium(GB-ADC-12)+PC(Japan Brand)
Power supply: USA Brand Flexible High Efficient Solar Panel
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Load Bearing: >20T(static)
Warranty: 12 Months
Body material: GB Cast Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: With shank or Without shank